Support for Windows Products
Support for Windows Products
How To Fix Clamav Error Cannot Find Libmilter
If you have Clamav Error Cannot Find Libmilter then we strongly recommend that you download and run this (Clamav Error Cannot Find Libmilter) repair tool.
Symptoms & Summary
Clamav Error Cannot Find Libmilter and other critical errors can occur when your Windows operating system becomes corrupted. Opening programs will be slower and response times will lag. When you have multiple applications running, you may experience crashes and freezes. There can be numerous causes of this error including excessive startup entries, registry errors, hardware/RAM decline, fragmented files, unnecessary or redundant program installations and so on.
In order to fix your error, it is recommended that you download the 'Clamav Error Cannot Find Libmilter Repair Tool'. This is an advanced optimization tool that can repair all the problems that are slowing your computer down. You will also dramatically improve the speed of your machine when you address all the problems just mentioned.
Recommended: In order to repair your system and Clamav Error Cannot Find Libmilter, download and run Reimage. This repair tool will locate, identify, and fix thousands of Windows errors. Your computer should also run faster and smoother after using this software.
File Size 746 KB
Compatible Windows XP, Vista, 7 (32/64 bit), 8 (32/64 bit), 8.1 (32/64 bit) Windows 10 (32/64 bit)
Apr29,2008,6:18AM Post #1 of 7 (4956 views) Permalink FreeBSD ./configure --enable-milter = Cannot find libmilter Hi #clamav-0.93 i want to use clamav-milter on a FreeBsd 4.8 System but if i try ./configure --enable-milter i get ..... checking whether setpgrp takes no argument... no checking for sendmail... /usr/sbin/sendmail checking for libgmp... yes checking how to link with libgmp... -lgmp checking for libiconv_open in -liconv... no checking for iconv... no checking whether in_port_t is defined... yes checking for in_addr_t definition... yes checking for mi_stop in -lmilter... no checking for library containing strlcpy... no checking for mi_stop in -lmilter... no configure: error: Cannot find libmilter i searched and i found http://lurker.clamav.net/message/20070716.090500.e2921603.de.html but it doesn't help i have sendmail_8.13.8 with milter support Version 8.13.8 Compiled with: DNSMAP LOG MAP_REGEX MATCHGECOS MILTER MIME7TO8 MIME8TO7 NAMED_BIND NETINET NETUNIX NEWDB NIS PIPELINING SCANF USERDB XDEBUG and the files in /usr/lib/ libmilter.a libmilter.so libmilter.so.2 libmilter_p.a i cannot change/ upgrade Sendmail or FreeBSD anybody any clue ?? must have something to do with: dnl --enable-milter if test "$have_milter" = "yes"; then dnl libmilter checking code adapted from spamass-milter by dnl Tom G. Christensen <tgc [at] statsbiblioteket> dnl Check for libmilter and it's header files in the usual locations save_LDFLAGS="$LDFLAGS" CLAMAV_MILTER_LIBS="$CLAMAV_MILTER_LIBS -lpthread" if test -d /usr/lib/libmilter ; then CLAMAV_MILTER_LIBS="$CLAMAV_MILTER_LIBS -L/usr/lib/libmilter" fi LDFLAGS="$LDFLAGS -lmilter $CLAMAV_MILTER_LIBS" AC_CHECK_LIB([milter],[mi_stop],[CLAMAV_MILTER_LIBS="-lmilter $CLAMAV_MILTER_LIBS"],[. dnl Older sendmails require libsm or libsmutil for support functions AC_SEARCH_LIBS([strlcpy], [sm smutil], [test "$ac_cv_search_strlcpy" = "none required" || CLAMAV_MILTER_XLIB
ClamAV installation problem - Cannot find libmilter If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. Results 1 to 5 of 5 Thread: ClamAV installation problem - Cannot find libmilter Tweet Thread Tools http://www.gossamer-threads.com/lists/clamav/users/38220 Show Printable Version Email this Page… Subscribe to this Thread… Display Linear Mode Switch to Hybrid Mode Switch to Threaded Mode 02-11-2005,05:05 AM #1 ddaas View Profile View Forum Posts Registered User Join Date Dec 2004 Location Germany Posts 80 ClamAV installation problem - Cannot find libmilter I want to install ClamAV 0.82 with milter support. http://forums.justlinux.com/showthread.php?137961-ClamAV-installation-problem-Cannot-find-libmilter I got the following error from ./configure script: checking whether setpgrp takes no argument... yes checking for __gmpz_init in -lgmp... yes checking for mi_stop in -lmilter... no checking for library containing strlcpy... no checking for mi_stop in -lmilter... no configure: error: Cannot find libmilter It says it cannot find libmilter. Then I checked if sendmail was build with milter support: Version 8.12.8 Compiled with: DNSMAP HESIOD HES_GETMAILHOST LDAPMAP LOG MAP_REGEX MATCHGECOS MILTER MIME7TO8 MIME8TO7 NAMED_BIND NETINET NETINET6 NETUNIX NEWDB NIS PIPELINING SASL SCANF STARTTLS TCPWRAPPERS USERDB USE_LDAP_INIT It seems that sendmail has been compiled with milter support. Then I looked for libmilter directory and there was none. So, what is the problem ? How do I solve it? Do I have milter support or not ? thanks, ddaas Reply With Quote 02-11-2005,05:07 AM #2 mrBen View Profile View Forum Posts Visit Homepage Limey Moderator Join Date Dec 2000 Location Glasgow, Scotland Posts 4,361 What distro are you installing on? Did you compile sendmail yourself? I sus
configure clamav-0-80 as follows in"/root/clamav-0.80 " directory.I am getting following error :########configure: error: http://clamav-users.clamav.narkive.com/ex0N9ieX/error-while-configure-milter Cannot find libmilter########Please guide where I will get 'libmilter'. http://marc.info/?l=clamav-users&m=118220440909922 Does itcomes with Redhat 9.0 if not from where?Thanks for support.__________________________________Do you Yahoo!?The all-new My Yahoo! - Get yours free!http://my.yahoo.com_______________________________________________http://lists.clamav.net/cgi-bin/mailman/listinfo/clamav-users Nigel Horne 2004-12-02 10:55:37 UTC PermalinkRaw Message Post by ads natHi,I am using Redhat 9.0 clamav error mail server with sendmail 8.13working properly.configure: error: Cannot find libmilter########Please guide where I will get 'libmilter'. Does itcomes with Redhat 9.0 if not from where?You need to install the sendmail-devel RPM.See .../clamav-milter/INSTALLPost by ads natThanks for support._______________________________________________http://lists.clamav.net/cgi-bin/mailman/listinfo/clamav-users Jon Dossey 2004-12-02 15:50:38 UTC PermalinkRaw clamav error cannot Message You haven't installed the sendmail libmilter libraries.Should be a "libmilter" directory in the root of the sendmail sourcetree. Just CD into it and ./Build (more or less). I'd recommendreading the documentation first. You could of course just install theredhat RPM's..jon-----Original Message-----Sent: Thursday, December 02, 2004 4:52 AMSubject: [Clamav-users] Error while "./configure --milter"Hi,I am using Redhat 9.0 mail server with sendmail 8.13working properly.I am trying to configure clamav-0-80 as follows in"/root/clamav-0.80 " directory.########configure: error: Cannot find libmilter########Please guide where I will get 'libmilter'. Does itcomes with Redhat 9.0 if not from where?Thanks for support.__________________________________Do you Yahoo!?The all-new My Yahoo! - Get yours free!http://my.yahoo.com_______________________________________________http://lists.clamav.net/cgi-bin/mailman/listinfo/clamav-users__________________________________________________________________________"The information transmitted is intended only for the person or entity towhich it is addressed and may contain confidential, proprietary, and/orprivileged material. Any review, retransmission, dissemination or
4676FD73.3070606 () systame ! com [Download message RAW] Randall Perry wrote: > Having trouble building with clamav-milter. > > Initially I did just: > ./configure --enable-milter --prefix=/opt/local > make > make install > > It installed fine. But running the startup script I noticed > clamav-milter wasn't installed. > > So, installed the libmilter libraries by going into sendmail libmilter > source: > ./Build all > ./Build install > > The header and lib files were installed in /usr. > > Went to build clamav again, but this time got the error: > configure: error: Cannot find libmilter > > Which is strange as it didn't complain the libmilter library was missing > when it was, but is now complaining it's missing when it isn't. > > Any ideas? > > > Answering my own question -- looks like clamav requires a dynamic libmilter lib. Thanks to Robert Delius Royar for instructions shown below, which worked for me: If you want a dylib, try this. Build sendmail with -DMILTER in your site.m4 cd ./obj.Darwin.8.9.0.PowerMacintosh/libmilter make clean make rm *.o Now, copy one of the cc commands It looks like this on my system cc -pipe -Os -g -pipe -mcpu=970 -mtune=970 -mpim-altivec \ -mpowerpc-gpopt -I. -I../../sendmail -I../../include \ -I/opt/local/include -DDARWIN=80000 -DBIND_8_COMPAT -DNETINET6 \ -DNOT_SENDMAIL -Dsm_snprintf=snprintf -w -DXP_MT -c -o main.o \ main.c Modify it like so gcc -fno-common -pipe -Os -g -pipe -mcpu=970 -mtune=970 -mpim-altivec \ -mpowerpc-gpopt -I. -I../../sendmail -I../../include \ -I/opt/local/include -DDARWIN=80000 -DBIND_8_COMPAT -DNETINET6 \ -DNOT_SENDMAIL -Dsm_snprintf=snprintf -w -DXP_MT -c *.c Note that I just used the wildcard to compile all the source files at once. You can remove the '-pipe -Os -g -pipe -mcpu=970 -mtune=970 -mpim-altivec -mpowerpc-gpopt', but you need the -fno-common. see http://finkproject.org/doc/porting/porting.en.html#shared.build-lib You should see no output, but the object files should be made. Now issue a command such as gcc -dynamiclib -instal
Clamav Errorcommunities company blog Stack Exchange Inbox Reputation and Badges sign up log in tour help Tour Start here for a quick overview of the site Help Center Detailed answers to any questions you might have Meta Discuss the workings clamav libclamav and policies of this site About Us Learn more about Stack Overflow Error Ld Returned Exit Status the company Business Learn more about hiring developers or posting ads with us Ask Ubuntu Questions Tags Users clamav linux commands Badges Unanswered Ask Question Ask Ubuntu is a question and answer site for Ubuntu users and developers Join them it
clamav error daemonize failed
Clamav Error Daemonize FailedStart here for a quick overview of the site Help Center Detailed answers to any questions you might have Meta Discuss the workings and policies of this site About Us Learn more about Stack Overflow the company Business Learn more about hiring developers starting clamav daemon clamd failed or posting ads with us Server Fault Questions Tags Users Badges Unanswered Ask Question Server Clamav Memory Usage Fault is a question and answer site for system and network administrators Join them it only takes a minute Sign up Here's how it works var log clamav freshclam log is
clamav error malformed database
Clamav Error Malformed Databaseby date thread subject author Hi Ged thanks for your feedback What does Whipped out mean rm usr local share clamav You have said neither from where you are trying to download the file nor exactly how you are using wget to clamav can t verify database integrity do it which might perhaps have helped I always take the files with 'freshclam' My Libclamav Error Problem Parsing Database At Line usr local etc freshclam conf consists only of comment lines So I assume it will pull the date from a default location As I got this error
There are many reasons why Clamav Error Cannot Find Libmilter happen, including having malware, spyware, or programs not installing properly. You can have all kinds of system conflicts, registry errors, and Active X errors. Reimage specializes in Windows repair. It scans and diagnoses, then repairs, your damaged PC with technology that not only fixes your Windows Operating System, but also reverses the damage already done with a full database of replacement files.
A FREE Scan (approx. 5 minutes) into your PC's Windows Operating System detects problems divided into 3 categories - Hardware, Security and Stability. At the end of the scan, you can review your PC's Hardware, Security and Stability in comparison with a worldwide average. You can review a summary of the problems detected during your scan. Will Reimage fix my Clamav Error Cannot Find Libmilter problem? There's no way to tell without running the program. The state of people's computers varies wildly, depending on the different specs and software they're running, so even if reimage could fix Clamav Error Cannot Find Libmilter on one machine doesn't necessarily mean it will fix it on all machines. Thankfully it only takes minutes to run a scan and see what issues Reimage can detect and fix.
A Windows error is an error that happens when an unexpected condition occurs or when a desired operation has failed. When you have an error in Windows, it may be critical and cause your programs to freeze and crash or it may be seemingly harmless yet annoying.
A stop error screen or bug check screen, commonly called a blue screen of death (also known as a BSoD, bluescreen), is caused by a fatal system error and is the error screen displayed by the Microsoft Windows family of operating systems upon encountering a critical error, of a non-recoverable nature, that causes the system to "crash".
One of the biggest causes of DLL's becoming corrupt/damaged is the practice of constantly installing and uninstalling programs. This often means that DLL's will get overwritten by newer versions when a new program is installed, for example. This causes problems for those applications and programs that still need the old version to operate. Thus, the program begins to malfunction and crash.
Computer hanging or freezing occurs when either a program or the whole system ceases to respond to inputs. In the most commonly encountered scenario, a program freezes and all windows belonging to the frozen program become static. Almost always, the only way to recover from a system freeze is to reboot the machine, usually by power cycling with an on/off or reset button.
Once your computer has been infected with a virus, it's no longer the same. After removing it with your anti-virus software, you're often left with lingering side-effects. Technically, your computer might no longer be infected, but that doesn't mean it's error-free. Even simply removing a virus can actually harm your system.
Reimage repairs and replaces all critical Windows system files needed to run and restart correctly, without harming your user data. Reimage also restores compromised system settings and registry values to their default Microsoft settings. You may always return your system to its pre-repair condition.
Reimage patented technology, is the only PC Repair program of its kind that actually reverses the damage done to your operating system. The online database is comprised of over 25,000,000 updated essential components that will replace any damaged or missing file on a Windows operating system with a healthy version of the file so that your PC's performance, stability & security will be restored and even improve. The repair will deactivate then quarantine all Malware found then remove virus damage. All System Files, DLLs, and Registry Keys that have been corrupted or damaged will be replaced with new healthy files from our continuously updated online database.
Downloads in September: 361,927
Download Size: 746KB
To Fix (Clamav Error Cannot Find Libmilter) you need to follow the steps below:
Download Clamav Error Cannot Find Libmilter Repair Tool
Click the "Scan" button
Click 'Fix All' and the repair is complete.
Windows Operating Systems:
Compatible with Windows XP, Vista, Windows 7 (32 and 64 bit), Windows 8 & 8.1 (32 and 64 bit), Windows 10 (32/64 bit).